Premium 8-Zone Conventional Fire Alarm Controller Fire Safety Solutions
Premium 8-Zone Conventional Fire Alarm Controller Fire Safety Solutions
Key Attributes
Product Attributes
Product Description
Product Description:
The information provided in this manual covers the Master and Slave fire alarm control panel. The panel range is designed to
meet the requirements of EN54 Parts 2 & 4.
A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization,
photoelectric, photoelectric-thermal and heat detectors.
Each of the system components has been specifically designed to operate as part of the system. This provides assurance
that the control panel, smoke detectors, interface devices and the ancillary components are all fully compatible with one
another and that the full range of system functionality is supported by each device.
The fire alarm control panels (8 Zones) provide all of the sophisticated features required of a leading edge conventional fire
alarm system along with the simple operation and efficient installation methods demanded by both installers and building users
Product Features:
8 conventional input zones.
Housed in a 370mm W x 440mm H x 100mm D metal enclosure.
Each zone can be connected with 30 conventional fire detectors. Each panel has external devices control output points, Through the points, the panel can control such external devices as bell, siren, flame detector, beam detector etc.
Dedicated alarm and trouble relays.
Enclosure supports 1 12V, 4.5Ah backup batteries.
The panel can be used independently or connect by RS485.
1 RS485 can be able to connect the other panel.
Technical parameters:
| Primary AC | 120VAC 50/60 Hz Power supply rating | Repeatability: | ≤± 2% FS; |
| 240VAC 50/60 Hz | Zero drift: | ≤± 1% FS/6h; | |
| Power supply rating | 2 Amps @ 24VDC | ||
| Maximum Battery Charging Current | 0.90 Amps @ 26VDC | ||
| Initiating Device Circuits Zones | Alarm Zone 2/4/8/16 | ||
| Normal Initiating Operating Voltage | 22VDC, Maximum 26VDC, regulated | ||
| Normal Monitor Current | <50mA | ||
| Alarm Current | <150 mA | ||
| Short Circuit Initiating Current (per zone) | 35mA Maximum | Working temperature: | -20~60 degrees; Working humidity: 0~100% RH (no condensation) |
| Maximum Initiating Resistance (per zone) | 10 ohms | Output method: | (choose one from three) or contact sales 1. 4-20mA signal: standard 16 bit precision 4-20mA output chip, transmission distance of 1km |
| Initiating End-of-Line Resistor | 4K7 ohms, 1/2W 5% | 2. RS485 signal: using standard MODBUS RTU protocol, transmission distance of 2Km | |
| Standby Detector Current (per zone) | 4mA maximum | 3. Switching signal: Standard configuration includes 2 sets of relays, optional third set of relays, passive contacts, capacity 125VAC/0.3A 30VDC/1A |
|
| Maximum Detector Count (per zone) | 30 detectors | ||
| Initiating Cabling Type | 18AWG Twisted Shielded pair (14 - 18 AWG) | ||
| Detector Base Impedance | 430 ohms | ||
| Fault Relay rating | 2A & 30VAC, resistive | ||
| Alarm( Auxiliary ) Relay rating | 2A & 30VAC, resistive |
Related Products
WiFi Smart Wireless Smoke Alarm Detector for Security
Product Details: Smoke Alarm is a photoelectric smoke alarm with low power consumption. It can be connected to a mobile phone APP via wireless WiFi . I nternal p recise analog circuit and digital circuit make the detection work more stable and reliable . 3 AA batteries allow the product to standby for more than 3 years. The product has a service life of up to 10 years. Product characteristics: Photoelectric smoke detection Reliable performance and less nuisance alarms Precise
Explosion-Proof Portable Flammable Toxic Gas Leak
Product Features : Modular structure, easy maintenance, simple wiring and installation Intelligent sensor platform, plug and play, no need for on-site calibration High precision brand sensors with fast response, strong anti-interference ability, and long lifespan High quality cast aluminum shell, meeting explosion-proof, waterproof and dustproof requirements, can be used with confidence Can be used in networking with column alarm hosts, matching each point and combining
Connected Wi-Fi SM2103-SDWM Fan Coil Thermostats for Temperature Instrument Control
Product Details: Manual or automatic 3-speed fan control On/Off control Heating/Cooling valves Auto, Heat, Cool and Ventilation modes Manual or automatic Heating/Cooling changeover Input for external sensor (air or pipe temperature) Input for windows/energy saving contact etc. Automatic Heating/Cooling changeover via changeover sensor User setpoint limitation Clock and time schedule functions (optional) Key lock Configurable user parameters Modbus TCP communication White
30036W Energy Storage Container Air Conditioner Industrial Air Conditioning Wall-Mounted Cooling Unit
This air conditioner is a refrigeration product independently developed for the cooling of communication cabinets, which is suitable for applications where the internal heat of the cabinet is large, the internal electronic equipment is sensitive to the ambient temperature, and the inside and outside need to be completely isolated.This product has complete functions, high reliability, simple installation, can work after power-on, and does not require complex debugging.
Ess Container Energy Storage Solution Air Conditioning System Wall/Floor Mount
Feature: : 1) Large air volume, small enthalpy difference 2) Intelligent hot and cold dual setting function 3) Dehumidification if needed 4) Year-round cooling 5) Special techniques on anti-corrosion 6) Microcomputer control Detailed Introduction: 1.Using high-quality multi-blade direct-drive centrifugal fan,achieve the effect of rapid and uniform cooling. 2.Using excellent fully enclosed scroll compressors, with high energy efficiency. 3.Using high-performance condensing
DC to DC Converter MPPT Solar Charge Controller Battery Charger
Product Description: The output voltage is stabilized, free of peaks, smoothed and filtered. Galvanic isolation between input and output: No overvoltage at the output and thus protection of the consumer if the ground line is lost. Clean, undisturbed mass ratios, even with long supply lines. Stable operating voltage on site in mobile operation, e.g. Containers, trailers, roll containers etc. Filtering and suppression of disturbances on the input to the output side. Fully
3-in-1 Smart Charger AC to DC DC to DC MPPT Solar Battery Charger
Product Description: The DC Battery Charger is a versatile and efficient charging solution designed for solar MPPT systems. With a start battery charge current ranging from 0-5A and a start battery voltage range of 10.5V-6V, this charger ensures optimal performance and reliability. Equipped with a maximum charge current of 20A, the DC Battery Charger is capable of efficiently charging batteries for various applications. Its solar MPPT technology allows for maximum power point
High Voltage MPPT Solar Inverter Dcdc Power Module 30kw for DC Input Charger
Main features: high frequency transformer isolation full hot plug design super denoise mode less than 55dB fan audio noise solar power input support by MPPT wide output range of voltage from 150Vdc to 1000Vdc, workable on a wide range of electric vehicles constant current for higher output power at low output voltage wide input DC voltage from 300V to 825Vdc intelligent automatic discharging of residual charge super standby power consumption 2W ambient temperature from -40ºC
Solar PV System Waterproof IP65 DC 1000V 8 String Solar PV Combiner Box TUV CE Approved
Product Description: PV combiner box bus synthetic DC input of 8 PV components to 1 output. Each channel is with a fuse. Output side is equipped with lightning protection and circuit breaker. It greatly simplify input wiring of DC power distribution cabinet and inverter. Realize lightning protecion, short circuit protection and grounding protection. PV combiner box divided into two types: intrlligent box and non-intelligent box . Intelligent PV combiner box is equipped with
Electrical Panel Box Electrical Control Panel Board Electrical Distribution Box Distribution Panel Box
Product Description: The High and low voltage switchgear is a device connected to high voltage or low voltagecable. General power supply bureaus and substations use high-voltage cabinets, and thru thepower transformer for step down to low-voltage cabinets, then thru low-voltage cabinets toeach power distribution box. It Is an electric equipment assembled of some switchgear, circuitbreakers, protection devices and circuit breakers etche high and low voltage switchgear is an
IP65 Solar System DC PV Combiner Box 6 Strings Input 1 Output Combiner Box with SPD and Fuse
Product Description: With overall protection such as counterattack prevention over-current protection, over-voltage protection and lightning prevention. PV combiner boxes are used to reduce the connecting wires between a PV module and an inverter or controller, make maintenance easy, reduce the loss and improve product safety and reliability PV combiner box produced by us has all the functions above and provides users with a complete solution for PV power generation systems
Request A Quote
Please fill out the form below and we will get back to you as soon as possible.
