DC to DC Converter MPPT Solar Charge Controller Battery Charger

Name: DC to DC Converter MPPT Solar Charge Controller Battery Charger
Brand: SHENZHEN COENG TECH CO., LTD.
Availability: InStock

Product Attributes

Highlight

MPPT Solar Charge Controller

Product Description

Product Description:

No overvoltage at the output and thus protection of the consumer if the ground line is lost.
Clean, undisturbed mass ratios, even with long supply lines.
Stable operating voltage on site in mobile operation, e.g. Containers, trailers, roll containers etc.
Filtering and suppression of disturbances on the input to the output side.

Fully automatic continuous operation: The DC-DC converter can constantly work with the battery
Surveillance-free operation: multiple protection against overload, overheating, over voltage, short circuit, Misconduct and deep discharge of the battery through electronic regulation to complete
Switch off by built-in safety switch.

Product parameters:

Main battery " Bord "
Lead-Acid, Gel, AGM Batteries Nominal Voltage	12V
LiFePO4 Nominal Voltage	12.8V
lithium- ion( NCM) Nominal Voltage	11.1V
Capacity (Battery Size), recommended:	45-280AH
Vehicle Starter Battery "Start II":
Vehicle Starter Battery Nominal Voltage:	12V
Min. Battery Capacity (Size), recommended:	60AH
12 V / 12 V B2B Charging operation
Input Voltage Range "Start II" ,"D+" controlled:	10.5-16V
Maximum charging power:	650W
" Bord " Max. charge current	30A
Activation Control Input "D+"	8-16V
Signal Output "OK/TR", Switch Position "TR", Cutoff Relay Bypass/max	12V/1A
Signal Output "OK/TR", Switch Position "OK"	12V/1A
Input "T T" for Battery Temperature Sensor "Board I":	YES
" Ss-" "Ss+" Inputs Sensor Cables "-" and "+" for Battery "Board I":	YES
stand-by current	24mA
Main battery overvoltage protection	15.5V
weight	1.44kg
demension	190×194×70mm
Operating temperature	-20-50ºC