Automatic Customized Continuous Transfer Intermittent Coater Machine For Lithium Battery Production Electrode Coating
Automatic Customized Continuous Transfer Intermittent Coater Machine For Lithium Battery Production Electrode Coating
Key Attributes
Product Attributes
Highlight
automatic lithium battery coater machine
,continuous transfer electrode coating machine
,intermittent coater for battery production
Product Description
Automatic Customized Continuous Transfer Intermittent Coater Machine
For Lithium Battery Production Electrode Coating
Technical Parameters and Main Configuration
Main Configuration
| NO. | Name | Place of Origin |
|---|---|---|
| 1 | Air switch | Chint / Delixi (Domestic) |
| 2 | PLC | OMRON |
| 3 | Touch screen | Weinview |
| 4 | Modular | OMRON |
| 5 | Intermediate relay | Schneider |
| 6 | Servo motor | Mitsubishi |
| 7 | Planetary reducer | Feng Hua (Taiwan) |
| 8 | Circuit breaker | Delixi (Domestic) |
| 9 | AC contactor | Delixi (domestic) |
| 10 | Solid state relay | FOTEK (Taiwan) |
| 11 | Thermostat | Yatai (Domestic) |
| 12 | Automatic deviation correction | Ultrasonic |
| 13 | Full automatic tension | Variable frequency tension |
| 14 | Optical fiber electric eye | KEYENCE (Japan) |
| 15 | Push cylinder | Yadeke / Qilico |
| 16 | Deep groove ball bearing (Machine head) | NSK/NTN |
| 17 | Coating roller | Hard chromium plating |
| 18 | Back roller | Imported EPDM |
| 19 | Scraper | Hard chromium plating |
| 20 | Guide roller | Anodizing of aluminum alloy surface |
| 21 | Frequency converter | Yingweiteng |
| 22 | Fan | Xin fan |
Technical Parameters
| NO. | Project | Technical Parameter | Remarks |
|---|---|---|---|
| 1 | Apply | It is applicable to the coating process of positive and negative electrode of LiFePO4,LiCoO2,LiMn2O4and other type batteries | |
| 2 | Operating substrate thickness | Aluminum foil(Al):10-30um; Copper foil(Cu):7-30um | |
| 3 | Design width of roll surface | 380 mm | |
| 4 | Guaranteed coating width | 100-300mm | |
| 5 | Mechanical running speed | 7m/min | |
| 6 | Coating speed | ≤2m/min | It depends on the drying condition |
| 7 | Suitable slurry viscosity | 2000-16000 cps | |
| 8 | Single side coating dry thickness range | 50-200μm | |
| 9 | Minimum intermittent length | ≥5mm | Related to slurry characteristics |
| 10 | Minimum coating length of multiple sections | ≥20mm | Related to slurry characteristics |
| 11 | Solvent properties | Oily solvent NMP(s.g=1.033,b.p=204℃) Aqueous solvent H2O/NMP(s.g=1.000,b.p=100℃) | |
| 12 | Suitable solid content | Positive S.C. 60%±20% Negative S.C. 50%±10% (PVDF system) S.C. 50%±5%(SBR system) | |
| 13 | Single side coating dry thickness error | Within ± 3um | |
| 14 | Coating method | Double layer front and back 3-stage unequal distance intermittent transfer coating / second side automatic tracking / continuous transfer coating | |
| 15 | Substrate running direction | Forward coating, substrate forward and reverse empty foil operation | |
| 16 | Overall dimensions | L8.5*W1.5*H2.3m |
Structure Introduction of Each Part
Integral Unwinding, Head Mechanism
| NO. | Project | Technical Parameter | Remarks |
|---|---|---|---|
| 1 | Roller mounting structure | Rack installation mode | |
| 2 | Roller surface treatment | Surface oxidation of metal aluminum roller | |
| 3 | Tension control system | Closed loop automatic control, constant tension, tension range 0-50N | |
| 4 | Deviation correction method | Automatic EPC control, stroke 80mm | |
| 5 | Coiling mode | The material roll is fixed by 3-inch air expansion shaft Unwinding single shaft support | |
| 6 | Substrate running direction | Forward and reverse | |
| 7 | Substrate running speed | 5m/min | |
| 8 | Maximum unwinding diameter | Ф 300mm | |
| 9 | Maximum bearing capacity of inflatable shaft | 100Kg | |
| 10 | Number of unwinding inflatable shafts | Article 1 | |
| 11 | Main drive motor | Servo motor | |
| 12 | Intermittent push | Servo drive | |
| 13 | Roller surface treatment | Surface oxidation of metal aluminum roller, circular runout ≤ 30um | |
| 14 | Scraper structure | Double sided comma scraper, diameter Ø 80mm | |
| 15 | Scraper angle rotation control | Handle rotation | |
| 16 | Coating roller (Steel roller) | The surface is plated with hard chromium, with a diameter of Φ 120mm | |
| 17 | Back roller (Rubber roller) | Φ 120mm in diameter, imported EPDM for surface bread | |
| 18 | Trough mixing | The rodless cylinder moves in a straight line and the speed is adjustable | |
| 19 | Intermittent height adjustment of scraper | Manual adjustment | |
| 20 | Stand alone head position | Installation and operation before drying channel |
Drying Channel
| NO. | Project | Technical Parameter | Remarks |
|---|---|---|---|
| 1 | Oven structure | Double layer heating, arranged up and down | |
| 2 | Oven length | 6m (3m/section*2) | |
| 3 | Material | SUS304 stainless steel, inner liner 1.0mm, outer liner 1.2mm | |
| 4 | Driving mode of oven guide roller | Passive idler drive | |
| 5 | Temperature control | It is divided into protection control of normal working temperature control and overtemperature monitoring alarm. In case of overtemperature, audible and visual alarm will appear and the main heating power supply will be cut off; Each section is completely controlled independently. | |
| 6 | Heating way | Electric heating, hot air circulation structure | |
| 7 | Heating power of single section oven | 13.5KW/3m | |
| 8 | Temperature in drying channel | Design Max 150 ℃, temperature difference in single section oven ≤ 5 ℃ | |
| 9 | Box surface temperature during operation | ≤45℃ | |
| 10 | Blowing mode | Upper and lower air blowing, and the upper and lower air volume are controlled respectively through valves; The upper and lower air chambers share the heating body | |
| 11 | Exhaust volume control of each section | Air volume of circulating fan 3000m³/h (single section) Exhaust air volume 4000m³/h | |
| 12 | Air nozzle structure | The blowing direction is 30°from the horizontal, and the air nozzle slot is slotted with a special die | |
| 13 | Heating control | Solid state relay | |
| 14 | Fan material | SUS304 stainless steel | |
| 15 | Solvent recovery system | No, only assist in the installation of interfaces | |
| 16 | NMP solvent concentration alarm | None | |
| 17 | Air chamber pressure monitoring | None |
Winding Mechanism
The function is the same as that of unwinding, with the following additions:
| NO. | Project | Technical Parameter | Remarks |
|---|---|---|---|
| 1 | Tension | One set is installed in front of the traction roller, with closed-loop automatic control, constant tension, tension range of 0 ~ 50N, servo control. | |
| 2 | Installation structure | Square frame welding | |
| 3 | Number of windup inflatable shafts | Article 1 | Single arm winding |
Control System
| NO. | Project | Technical Parameter | Remarks |
|---|---|---|---|
| 1 | Main control system | Touch screen, PLC, module, servo system | |
| 2 | Operation mode | Manual, automatic and emergency stop; The whole machine can be operated before and after. | |
| 3 | Setting range of coating and intermittent length | Coating length: 20.0-3200.0mm Intermittent length: 5.0-3200.0mm | |
| 4 | Alarm condition | In case of equipment failure, the touch screen will display the corresponding correction screen | |
| 5 | Counting function | Production quantity / length | |
| 6 | Head and tail thickness adjustment mode | The speed ratio of steel roller and rubber roller is controlled by program |
Machine Accuracy
Hardware Accuracy
| NO. | Project | Technical Parameter | Remarks |
|---|---|---|---|
| 1 | Scraper | Circular jump ≤ 1.5um, Ra0 4, Straightness ≤ 1.5um | |
| 2 | Coating roller (Steel roller) | Circular runout ≤ 1.5um, Ra0 4, Straightness ≤ 1.5um | |
| 3 | Rubber roller | Circular runout ≤ 10um, straightness ≤ 10um | |
| 4 | Deviation correction | ±0.1mm | |
| 5 | Tool adjustment control repetition accuracy | ±0.1um | |
| 6 | Temperature control accuracy | ±2℃ |
Related Products
100MWH EV Battery Prismatic Cell Manufacturing Line Machine
Product Description: The shell of the prismatic cell is mostly made of aluminum alloy, stainless steel and other materials. The internal winding or stacking process is adopted, which has a better protective effect on the cell than the aluminum plastic film battery (i.e., the pouch cell). The cell ...
Solid State Battery Laboratory Pilot Assembly Line Fabrication Machines
Product Description: Solid state batteries are a type of battery that uses solid electrodes and solid electrolytes, offering high safety and high energy density by weight and volume. They are expected to meet the increasingly demanding and often conflicting technical requirements in the development ...
1GWh LFP Battery 30Ah 50Ah 100Ah Prismatic Cell Manufacturing Equipments Line
Product Description: Prismatic cell is often used for high capacity battery applications to optimise the use of space. These designs use a stacked electrode structure in which the anode and cathode foils are cut into individual electrode plates which are stacked alternately and kept apart by the ...
Semi-Auto Cylindrical Battery Pack Assembly Line Machine For 18650 21700 26650 32700 Cylindrical Battery
Generally 18650 lithium battery pack includes: 18650 battery, battery protection board, connecting nickel sheet, insulating paper, wire, PVC outer package, connector, key switch, power indicator light and auxiliary material (EVA), plastic bracket make up pack. Large capacity 18650 battery capacity ...
32 Series 300A(Overcurrent)Lithium Battery BMS Testing Machine With Computer And Cabinet CAN Communication
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
Small Manual Spot Welding Machine Battery Tab Welding Machine
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
18650 Desk-Top Double Pulse Manual Spot Welding Machine For Battery Electrode Nickel Tabs Welding
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
Aluminium Foil And Copper Foil Slitter Cylindrical Battery Electrode Slitting Machine
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
200W Pulse Laser Cleaning Machine For Battery Surface
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
3000W Fiber Laser Galvanometer Welding Machine For Prismatic Cell Assembly
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
360mm Width Roll To Roll Intermittent Slot Die Coating Machine With Optional Oven Length
Automated grooving machine for cylindrical battery cases. Features batch processing (30 pcs/min), ±0.1mm accuracy, PLC touch control, and micrometer adjustments. Handles 18650/26650 sizes with conveyor loading. 1-year warranty.
Request A Quote
Please fill out the form below and we will get back to you as soon as possible.
