Hệ thống lưu trữ năng lượng và các thành phần

Product Description: Specification Model P128S-0001 1 Adopt two-level protection 2 Support 40S-128S 3 Support hierarchical management and control of modules/packs/clusters. 4 Support energy storage applications within 500V 5 Support multi-channel relay drive and relay adhesion detection. 6 Automatic ...

Product Description: Robust Design: IP65-rated ABS enclosure for harsh environments. High Safety: Integrated surge arrester (40kA) and fuse protection. Flexible Configuration: Adjustable input current (60A) and wide fuse range (10A–80A). Certified Compliance: Meets IEC/EN standards with TUV & CE ...

Product Description: With overall protection such as counterattack prevention over-current protection, over-voltage protection and lightning prevention. PV combiner boxes are used to reduce the connecting wires between a PV module and an inverter or controller, make maintenance easy, reduce the loss ...

Product Description: The High and low voltage switchgear is a device connected to high voltage or low voltagecable. General power supply bureaus and substations use high-voltage cabinets, and thru thepower transformer for step down to low-voltage cabinets, then thru low-voltage cabinets toeach power ...

Product Description: PV combiner box bus synthetic DC input of 8 PV components to 1 output. Each channel is with a fuse. Output side is equipped with lightning protection and circuit breaker. It greatly simplify input wiring of DC power distribution cabinet and inverter. Realize lightning protecion, ...

Product Description: The output voltage is stabilized, free of peaks, smoothed and filtered. Galvanic isolation between input and output: No overvoltage at the output and thus protection of the consumer if the ground line is lost. Clean, undisturbed mass ratios, even with long supply lines. Stable ...

Product Description: The DC Battery Charger is a versatile and efficient charging solution designed for solar MPPT systems. With a start battery charge current ranging from 0-5A and a start battery voltage range of 10.5V-6V, this charger ensures optimal performance and reliability. Equipped with a ...

Main features: high frequency transformer isolation full hot plug design super denoise mode less than 55dB fan audio noise solar power input support by MPPT wide output range of voltage from 150Vdc to 1000Vdc, workable on a wide range of electric vehicles constant current for higher output power at ...

Feature:: 1) Large air volume, small enthalpy difference 2) Intelligent hot and cold dual setting function 3) Dehumidification if needed 4) Year-round cooling 5) Special techniques on anti-corrosion 6) Microcomputer control Detailed Introduction: 1.Using high-quality multi-blade direct-drive ...

This air conditioner is a refrigeration product independently developed for the cooling of communication cabinets, which is suitable for applications where the internal heat of the cabinet is large, the internal electronic equipment is sensitive to the ambient temperature, and the inside and outside ...

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), ...

Product Details: Manual or automatic 3-speed fan control On/Off control Heating/Cooling valves Auto, Heat, Cool and Ventilation modes Manual or automatic Heating/Cooling changeover Input for external sensor (air or pipe temperature) Input for windows/energy saving contact etc. Automatic Heating...

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), ...

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), ...

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), ...