Energiespeicher-System & Komponenten

Product Description: Specification Model P128S-0001 1 Adopt two-level protection 2 Support 40S-128S 3 Support hierarchical management and control of modules/packs/clusters. 4 Support energy storage applications within 500V 5 Support multi-channel relay drive and relay adhesion detection. 6 Automatic address coding Product parameters: Model P128S-0001 String number Support 40-128S Applicable platform 100-500V Supply voltage DC 24V SOH ≤10% SOC ≤5% Communication method RS485

Product Description: Robust Design: IP65-rated ABS enclosure for harsh environments. High Safety: Integrated surge arrester (40kA) and fuse protection. Flexible Configuration: Adjustable input current (60A) and wide fuse range (10A–80A). Certified Compliance: Meets IEC/EN standards with TUV & CE certifications. P65 DC string box is designed for 4 string PV system. For surge protection and current protection at solar DC side. These are used to allow the parallel connection of

Product Description: With overall protection such as counterattack prevention over-current protection, over-voltage protection and lightning prevention. PV combiner boxes are used to reduce the connecting wires between a PV module and an inverter or controller, make maintenance easy, reduce the loss and improve product safety and reliability PV combiner box produced by us has all the functions above and provides users with a complete solution for PV power generation systems

Product Description: The High and low voltage switchgear is a device connected to high voltage or low voltagecable. General power supply bureaus and substations use high-voltage cabinets, and thru thepower transformer for step down to low-voltage cabinets, then thru low-voltage cabinets toeach power distribution box. It Is an electric equipment assembled of some switchgear, circuitbreakers, protection devices and circuit breakers etche high and low voltage switchgear is an

Product Description: PV combiner box bus synthetic DC input of 8 PV components to 1 output. Each channel is with a fuse. Output side is equipped with lightning protection and circuit breaker. It greatly simplify input wiring of DC power distribution cabinet and inverter. Realize lightning protecion, short circuit protection and grounding protection. PV combiner box divided into two types: intrlligent box and non-intelligent box . Intelligent PV combiner box is equipped with

Product Description: The output voltage is stabilized, free of peaks, smoothed and filtered. Galvanic isolation between input and output: No overvoltage at the output and thus protection of the consumer if the ground line is lost. Clean, undisturbed mass ratios, even with long supply lines. Stable operating voltage on site in mobile operation, e.g. Containers, trailers, roll containers etc. Filtering and suppression of disturbances on the input to the output side. Fully

Product Description: The DC Battery Charger is a versatile and efficient charging solution designed for solar MPPT systems. With a start battery charge current ranging from 0-5A and a start battery voltage range of 10.5V-6V, this charger ensures optimal performance and reliability. Equipped with a maximum charge current of 20A, the DC Battery Charger is capable of efficiently charging batteries for various applications. Its solar MPPT technology allows for maximum power point

Main features: high frequency transformer isolation full hot plug design super denoise mode less than 55dB fan audio noise solar power input support by MPPT wide output range of voltage from 150Vdc to 1000Vdc, workable on a wide range of electric vehicles constant current for higher output power at low output voltage wide input DC voltage from 300V to 825Vdc intelligent automatic discharging of residual charge super standby power consumption 2W ambient temperature from -40ºC

Feature:: 1) Large air volume, small enthalpy difference 2) Intelligent hot and cold dual setting function 3) Dehumidification if needed 4) Year-round cooling 5) Special techniques on anti-corrosion 6) Microcomputer control Detailed Introduction: 1.Using high-quality multi-blade direct-drive centrifugal fan,achieve the effect of rapid and uniform cooling. 2.Using excellent fully enclosed scroll compressors, with high energy efficiency. 3.Using high-performance condensing

This air conditioner is a refrigeration product independently developed for the cooling of communication cabinets, which is suitable for applications where the internal heat of the cabinet is large, the internal electronic equipment is sensitive to the ambient temperature, and the inside and outside need to be completely isolated.This product has complete functions, high reliability, simple installation, can work after power-on, and does not require complex debugging.

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), intelligent monitoring system (IMS), etc.are integrated into one, and the 20HQ standard container design is adopted, which saves application space and facilitates transportation,

Product Details: Manual or automatic 3-speed fan control On/Off control Heating/Cooling valves Auto, Heat, Cool and Ventilation modes Manual or automatic Heating/Cooling changeover Input for external sensor (air or pipe temperature) Input for windows/energy saving contact etc. Automatic Heating/Cooling changeover via changeover sensor User setpoint limitation Clock and time schedule functions (optional) Key lock Configurable user parameters Modbus TCP communication White

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), intelligent monitoring system (IMS), etc.are integrated into one, and the 20HQ standard container design is adopted, which saves application space and facilitates transportation,

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), intelligent monitoring system (IMS), etc.are integrated into one, and the 20HQ standard container design is adopted, which saves application space and facilitates transportation,

Product Description: EnerCube3.0 Container Battery Energy Storage System adopts an All-in-One modular design, integrating the battery PACK, intelligent energy storage converter (PCS), power distribution unit (PDU), automatic fire extinguishing system (FFS), and temperature control system (TcS), intelligent monitoring system (IMS), etc.are integrated into one, and the 20HQ standard container design is adopted, which saves application space and facilitates transportation,