1GWh LFP Batterie 30Ah 50Ah 100Ah Équipement de fabrication de cellules prismatiques
1GWh LFP Batterie 30Ah 50Ah 100Ah Équipement de fabrication de cellules prismatiques
Attributs clés
Attributs du produit
Description de produit
Description du produit :
La cellule prismatique est souvent utilisée pour les applications de batteries haute capacité afin d'optimiser l'utilisation de l'espace. Ces conceptions utilisent une structure d'électrodes empilées dans laquelle les feuilles d'anode et de cathode sont coupées en plaques d'électrodes individuelles qui sont empilées alternativement et maintenues à distance par le séparateur. Le séparateur peut être coupé à la même taille que les électrodes, mais il est plus probable qu'il soit appliqué en une longue bande en zigzag entre les électrodes alternées dans la pile.
Liste des équipements :
Configuration principale de l'équipement :
|
N° |
Nom de l'équipement |
|
1 |
Équipement de mélange |
|
2 |
Système d'alimentation |
|
3 |
Réservoir tampon de suspension |
|
4 |
Filère à fente double face automatique Machine de revêtement |
|
5 |
Système de récupération de NMP |
|
6 |
Calendre Machine |
|
7 |
Machine de découpe automatique 8 |
|
Machine d'estampage |
9 |
|
Machine d'empilage automatique |
10 |
|
Machine de soudage par points ultrasonique |
(Soudure de la languette au couvercle) 11 |
|
Machine de soudage de la plaque de recouvrement |
12 |
|
Machine d'emballage d'isolateur |
13 |
|
Machine d'encapsulation et de soudage |
14 |
|
Machine de test à l'hélium |
15 |
|
Machine à laver |
16 |
|
Testeur à rayons X |
17 |
|
Four à vide poussé |
18 |
|
Machine de remplissage automatique d'électrolyte |
19 |
|
Mouillage à haute température |
20 |
|
Machine de formation à pression négative |
21 |
|
Machine de soudage et de scellage laser |
22 |
|
Testeur OCV |
23 |
|
Machine de charge |
24 |
|
Machine à coller le film PVC |
25 |
|
Unité de séchage |
26 |
|
Unité de compresseur d'air |
27 |
|
Unité de vide |
28 |
|
Unité de génération d'azote |
29 |
|
De |
iMachine à eau ionisée30 |
|
Refroidisseur |
31 |
|
Testeur ACIR |
Le processus pour la cellule prismatique est illustré dans le schéma suivant : |
(a. Processus d'empilage)
Produits connexes
Machines de fabrication de lignes d'assemblage pilote de laboratoire de batteries à l'état solide
Product Description: S olid state batteries are a type of battery that uses solid electrodes and solid electrolytes, offering high safety and high energy density by weight and volume. They are expected to meet the increasingly demanding and often conflicting technical requirements in the development of power batteries, making them one of the important directions for the future of power battery development. Key Performance Attributes : Performance Reason for Improvement
Ligne de fabrication de cellules prismatiques de batteries pour véhicules électriques de 100 MWh
Product Description: The shell of the prismatic cell is mostly made of aluminum alloy, stainless steel and other materials. The internal winding or stacking process is adopted, which has a bette r protective effect on the cell than the aluminum plastic film battery (i.e., the pouch cell). The cell safety has also been greatly improved compared with the cylindrical battery. The popularity rate of prismatic cell is very high in China. With the rise of automobile power battery
Machine à assembler une batterie cylindrique semi-automatique pour une batterie cylindrique 18650 21700 26650 32700
Generally 18650 lithium battery pack includes: 18650 battery, battery protection board, connecting nickel sheet, insulating paper, wire, PVC outer package, connector, key switch, power indicator light and auxiliary material (EVA), plastic bracket make up pack. Large capacity 18650 battery capacity is generally between 1200 mAh ~ 3600mAh, while the general battery capacity is only about 800 mAh . If combined into 18650 battery, 18650 battery pack can easily break through
Chaîne de production de batteries au lithium prismatiques haute performance
Product Description: Ⅰ, Prismatic Cell Prismatic cell is often used for high capacity battery applications to optimise the use of space. These designs use a stacked electrode structure in which the anode and cathode foils are cut into individual electrode plates which are stacked alternately and kept apart by the separator. The separator may be cut to the same size as the electrodes but more likely it is applied in a long strip wound in a zig zag fashion between alternate
Chaîne de production d'assemblage de packs cylindriques automatique
Important process: 1. Detection of single cell: Battery Tester is mainly used to detect whether the parameters such as cell capacity, magnification and cycle times meet the use requirements. Test each single cell’s capacity to make sure the battery has good quality. Because different batches of batteries made by many battery manufacturers will have inconsistent capacity, internal resistance, open circuit voltage and charge discharge performance. The production of battery pack
Usine d'assemblage de batteries au lithium cylindriques semi-automatiques
Introduction: The new energy lithium battery pack assembly line is widely used in power tools, smart homes, electric vehicles, photovoltaic energy storage, intelligent lighting, mobile power, small appliances and new energy vehicles. In just a few years, the application scope of lithium ion battery pack has expanded from the scope of our ordinary industry. It is not only used for laptops, portable CDs and other digital products. We usually use electric bicycles to travel, and
matières premières pour la fabrication et la production de piles au lithium
Procedure for Preparing Water-based Electrode Slurry (Graphite Anode) & Recipe: · Weight Ratio (All other weights depends on how much active powder you will use): o Anode Active Powder - MCMB : 94.5% o CMC : 2.25% o SBR : 2.25% o Conductive- Super P : 1% o De-Ionized water: At least 120% of MCMB · Heat treat the active powder in the inert gas environment, 300~400 º C for an hour, *Heat treatment via LITH Furnace is suggested, please click the underline to view product details
Usine de fabrication de pochettes de cellules de laboratoire pour la recherche sur l'assemblage de batteries lithium-ion
Structure of batteries : Pouch cell lab line flow chart: : Process Item Product Name Description Powder processing Furnace Muffle Furnace/Tube Furnace/Atmosphere Muffle Furnace... Slurry vacuum mixing Mixer Compact Vacuum Mixer With Vibration Stage & Two Containers (1 25 & 500ml) With 1 25 ml and 500ml stainless steel container, Rotary Speed: 0- 320rpm Compact Dual-Shaft Planetary Vacuum Mixer Machine With A 500 ML Container Dual-Shaft, 500ml container, Rotary Speed: 0-
Usine d'équipement de production automatique de cellules en sachet pour la fabrication de batteries Li-ion
Structure of batteries : Pouch cell production line flow chart: Process Detailed procedure Equipment Name Main Features Drying Raw material baking Vacuum oven 450L, 3 layers, separate control Mixing Anode material mixing Vacuum Mixer 30Liter; mixing speed:0~70rpm; dispersion speed: 0 ~ 3800 rpm Cathode material mixing 30L vacuum mixer(basic model) 30Liter; mixing speed:0~70rpm; dispersion speed: 0 ~ 1400 rpm Coating Anode coating Slot die coating machine 300mm width, drying
Revêtement par rouleau à rouleau en mode double pour la production d'électrodes de batteries à semi-conducteurs
Product Description: Intermittent experimental coating machine is a three-roller transfer coating equipment. It can carry out continuous and intermittent coating, which is convenient to be applied to the equipment for surface coating process of various substrates. Especially used in the lithium ion battery industry. The equipment is designed to be convenient for researchers to use while meeting the requirements of coating accuracy and consistency, which is no different from
Laboratoire de fabrication de batteries à l'état solide avec trois chargeurs
Product Description: The LITH -111A-D is primarily used for the Z- fashion stacking assembly of cell electrodes and solid electrolyte. This equipment enables manual loading of pieces, by fully automatic alignment and stacking processes, offering high stacking efficiency and precision. It is designed to stack battery cells up to 160*160/ 300*300mm, with adjustments available for different sizes via interchangeable fixtures, making it highly suitable for the development and
Demander un devis
Veuillez remplir le formulaire ci-dessous et nous vous répondrons dans les plus brefs délais.
