Regenerative Battery Pack Aging Cabinet For Charge-Discharge Testing
Regenerative Battery Pack Aging Cabinet For Charge-Discharge Testing
Attributs clés
Nom de la marque:
COENG
Numéro de modèle:
Cabinet vieillissant de paquet de batterie régénératif pour l'essai de charge-décharge
Attestation:
CE
Quantité minimum de commande:
1
Prix:
Service Quotation
Délai de livraison:
60
Conditions de paiement:
D/A,L/C,D/P,T/T
Attributs du produit
Température de fonctionnement:
-20°C à 55°C
Équipement de test:
Testeur de tension, testeur de capacité, testeur de résistance interne
Types de batteries pris en charge:
Lithium-ion, lithium polymère, LiFePO4
Plage de tension de la batterie:
604,8 V-777,6 V
Processus principaux:
Tri cellulaire, soudage, assemblage, tests, conditionnement
Température de fonctionnement:
0°C à 45°C
Alimentation:
C.A. 220 V/380 V, 50/60 Hz
Type de batterie:
Lithium-ion, polymère de lithium
Système de contrôle:
Contrôle PLC avec interface à écran tactile
Poids:
Environ 2 000 à 5 000 kg
Intégration logicielle:
Prend en charge les systèmes MES et ERP
VoltageRange:
3,7 V à 48 V
Installation et formation:
Fournit par le fabricant
Capacité de la batterie:
552 kWh
Plage de tension de sortie:
3,7 V à 48 V (personnalisable)
Description du produit
Regenerative Battery Pack Aging Cabinet The COENG regenerative battery pack aging cabinet is a multi-channel battery pack charge-discharge tester for production quality control and laboratory evaluation. It supports capacity analysis, cycle life testing, charge and discharge characteristic assessment, charge retention evaluation, and charge-discharge efficiency measurement. Its energy-feedback design addresses regenerative battery testing applications. For battery pack
Note globale
cinq étoiles
100%
4 étoiles
0
3 étoiles
0
2 étoiles
0
1 étoile
0
Tous les avis
-
AOur project involved sourcing equipment for a university battery research laboratory. We needed a single-station glove box with gas purification, water and oxygen monitoring, and an English-language control interface. Penny coordinated the technical discussions and helped us compare the proposed configuration with the laboratory’s purchasing requirements. We reviewed the 2020 × 850 × 1900 mm overall dimensions for installation planning and checked the transfer chambers against the intended sample sizes. The COENG configuration brought the workspace, monitoring and purification functions together in one equipment package, making it easier to define our procurement scope.
-
JThe procurement discussions covered more than the battery specifications. Container dimensions, delivery access, unloading responsibilities and commissioning requirements were all important to our project planning. We valued having these points clearly defined before arranging shipment.
-
MWe selected the COENG glove box for a laboratory project involving moisture-sensitive battery materials and small-scale cell assembly. Our purchasing priorities were controlled water and oxygen levels, accessible working space and practical sample transfer. Penny helped us review the chamber dimensions, antechamber sizes and gas supply requirements against our planned workflow. She also clarified the conditions associated with the specified below-1-ppm water and oxygen acceptance levels. The stainless steel workspace, internal shelving and dual antechambers matched the configuration we were seeking for our research station.
Produits connexes
Chaîne de production de modules de batteries électriques PACK semi-automatique
Product Description: The semi-automatic PACK line is composed of the upper and lower double speed line with man-machine combination. The key units are: manual stacking of the core, automatic extrusion, CCD polarity detection, Busbar welding, total voltage insulation test, GN bad discharge mechanism, ...
Ligne de production de batterie de puissance automatique PACK
Product Description: Applied to power battery PACK/energy storage battery pack square aluminum shell core pack assembly, by the upper and lower double double speed chain line. The whole line is divided into PACK assembly line and module assembly line. The key units are: mechanical hand material, ...
Ligne de production automatique pour la détection de polarité de nettoyage des terminaux de soudage au laser des batteries au lithium
Product Description: 1. Production name: Li-ion battery pack laser welding machine 2. Application: Basbar welding, nickel welding, pole welding,stud welding, explosion-proof valve welding, liquid injection port welding. 3. Core configuration: Fiber optic continuous laser, moving structure of gantry ...
100V 7-Channel Battery Pack Aging Machine
100V 7-Channel Battery Pack Aging MachineCOENG's 100V battery pack aging machine is a seven-channel charge-discharge tester built for lithium-ion battery pack production. With 0–10A charging, 0–20A discharging and a specified discharge power of ≤1400W, it supports capacity measurement and charging...
48V 314Ah 15.072kWh Floor-Standing LiFePO4 Battery
48V 314Ah Floor-Standing LiFePO4 Battery — 15.072kWh Solar Storage The COENG WYLD48V314AH is a 48V 314Ah lithium iron phosphate (LiFePO4) solar battery delivering 15.072kWh of rated energy in a floor-standing cabinet. It is a 15kWh-class battery option built for residential solar installers, battery ...
1000W Laser Welding Machine For Cylindrical And Prismatic Battery Cells
1000W Battery Cell Laser Welding Workstation Overview COENG's 1000W battery laser welding machine is engineered for lithium-ion cell cover and shell welding. With suitable fixtures, this battery cell welding workstation supports cylindrical and prismatic cell applications, including straight seams ...
3000W CNC Fiber Laser Welding Machine for Lithium Battery Modules
Soudeuse laser à fibre CNC COENG 3000W pour modules de batterie au lithium. Zone de travail de 800 x 600 mm, positionnement ±0,05 mm. Demandez un devis spécifique à un projet.
Regenerative Battery Pack Aging Cabinet For Charge-Discharge Testing
Armoire de vieillissement des batteries régénératives COENG pour le cycle de charge-décharge, la vérification de la capacité et le contrôle qualité de la production. Envoyez les données du pack pour l’évaluation du projet.
COENG TWSL-300 Machine d'assemblage de batterie 3-en-1 18650
Automatisez le collage du papier isolant 18650, les tests de cellules et le soudage par points avec COENG TWSL-300. Examinez les spécifications du processus et demandez un devis de projet.
COENG DJ100S, machine à accumuler et à presser des cellules de batterie prismatiques semi-automatiques
Short product description The COENG DJ100S is a semi-automatic prismatic battery cell stacking and pressing machine for 280Ah lithium-ion battery modules. It combines manual loading, PLC-controlled electric cylinder pressing and manual steel band fastening in one module assembly station. Product ...
Boîte à gants sous vide à station unique COENG avec système de purification pour la recherche sur les batteries
COENG Single-Station Vacuum Glove Box With Purification System The COENG vacuum glove box with purification system provides an enclosed workspace for processes requiring controlled water and oxygen levels. Its single-side operating layout combines a stainless steel chamber, an inclined viewing ...
Demandez un devis
Veuillez remplir le formulaire ci-dessous et nous vous répondrons dans les plus brefs délais.
