100V 7-Channel Battery Pack Aging Machine
100V 7-Channel Battery Pack Aging Machine
Atribut Utama
Nama merek:
COENG
Nomor Model:
Mesin Penuaan Paket Baterai 100V 7 Saluran
Tempat Asal:
Tiongkok
Sertifikasi:
CE
Jumlah Pesanan Minimum:
1
Harga:
Service Quotation
Waktu Pengiriman:
30
Ketentuan Pembayaran:
L/C,D/A,D/P,T/T
Atribut Produk
Menyoroti
100V battery pack aging machine
,7-channel battery aging equipment
,lithium battery pack production line
Berat:
Kurang lebih 2000-5000kg
Kapasitas Baterai:
552kWh
Suhu pengoperasian:
0°C hingga 45°C
Catu daya:
AC 220V/380V, 50/60Hz
Metode pengelasan:
Pengelasan laser, pengelasan ultrasonik, pengelasan titik
Masa garansi:
12 Bulan
Produk keluaran:
Paket baterai litium rakitan dengan BMS
Catu Daya:
AC 220V/380V, 50/60Hz
Suhu Operasional:
-20°C hingga 55°C
Persyaratan operator:
Teknisi terampil diperlukan untuk pengoperasian dan pemeliharaan
Nilai Daya Keluaran:
500kW
Fitur keamanan:
Perlindungan arus berlebih, penghentian darurat, pencegahan kebakaran
Panjang jalur produksi:
Biasanya 10-30 meter
Rentang Tegangan:
3.7V hingga 48V
Baku mutu:
ISO9001, bersertifikat CE
Deskripsi Produk
100V 7-Channel Battery Pack Aging MachineCOENG's 100V battery pack aging machine is a seven-channel charge-discharge tester built for lithium-ion battery pack production. With 0–10A charging, 0–20A discharging and a specified discharge power of ≤1400W, it supports capacity measurement and charging/discharging protection checks for packs matched to its operating limits.This programmable battery pack tester combines CC/CV charging with constant-current discharge. Test recipes
Peringkat Umum
5 BINTANG
100%
Bintang 4
0
3 Bintang
0
Bintang 2
0
1 bintang
0
Semua Ulasan
-
RWe chose the COENG glove box for a battery materials development workspace requiring controlled-atmosphere handling and frequent transfers of small samples and laboratory tools. The large antechamber with its sliding tray, together with a separate small antechamber, was particularly relevant to our workflow. Penny worked through our material list, solvent use and utility requirements with us. We also discussed the regeneration function and the solvent adsorption module with its 7 kg activated carbon charge. Her explanation of the configuration and the items requiring technical confirmation helped us prepare a clearer installation and acceptance plan.
-
AOur project involved sourcing equipment for a university battery research laboratory. We needed a single-station glove box with gas purification, water and oxygen monitoring, and an English-language control interface. Penny coordinated the technical discussions and helped us compare the proposed configuration with the laboratory’s purchasing requirements. We reviewed the 2020 × 850 × 1900 mm overall dimensions for installation planning and checked the transfer chambers against the intended sample sizes. The COENG configuration brought the workspace, monitoring and purification functions together in one equipment package, making it easier to define our procurement scope.
-
MWe selected the COENG glove box for a laboratory project involving moisture-sensitive battery materials and small-scale cell assembly. Our purchasing priorities were controlled water and oxygen levels, accessible working space and practical sample transfer. Penny helped us review the chamber dimensions, antechamber sizes and gas supply requirements against our planned workflow. She also clarified the conditions associated with the specified below-1-ppm water and oxygen acceptance levels. The stainless steel workspace, internal shelving and dual antechambers matched the configuration we were seeking for our research station.
Produk Terkait
Jalur produksi modul baterai daya semi-otomatis PACK
Product Description: The semi-automatic PACK line is composed of the upper and lower double speed line with man-machine combination. The key units are: manual stacking of the core, automatic extrusion, CCD polarity detection, Busbar welding, total voltage insulation test, GN bad discharge mechanism, ...
Baterai listrik otomatis jalur produksi PACK
Product Description: Applied to power battery PACK/energy storage battery pack square aluminum shell core pack assembly, by the upper and lower double double speed chain line. The whole line is divided into PACK assembly line and module assembly line. The key units are: mechanical hand material, ...
Jalur Produksi Otomatis untuk Baterai Lithium Laser Pengelasan Terminal Pembersihan Deteksi Polaritas
Product Description: 1. Production name: Li-ion battery pack laser welding machine 2. Application: Basbar welding, nickel welding, pole welding,stud welding, explosion-proof valve welding, liquid injection port welding. 3. Core configuration: Fiber optic continuous laser, moving structure of gantry ...
48V 314Ah 15.072kWh Floor-Standing LiFePO4 Battery
48V 314Ah Floor-Standing LiFePO4 Battery — 15.072kWh Solar Storage The COENG WYLD48V314AH is a 48V 314Ah lithium iron phosphate (LiFePO4) solar battery delivering 15.072kWh of rated energy in a floor-standing cabinet. It is a 15kWh-class battery option built for residential solar installers, battery ...
1000W Laser Welding Machine For Cylindrical And Prismatic Battery Cells
1000W Battery Cell Laser Welding Workstation Overview COENG's 1000W battery laser welding machine is engineered for lithium-ion cell cover and shell welding. With suitable fixtures, this battery cell welding workstation supports cylindrical and prismatic cell applications, including straight seams ...
3000W CNC Fiber Laser Welding Machine for Lithium Battery Modules
Tukang las laser serat CNC COENG 3000W untuk modul baterai lithium. Area kerja 800 x 600 mm, posisi ±0,05 mm. Minta penawaran khusus proyek.
Regenerative Battery Pack Aging Cabinet For Charge-Discharge Testing
Kabinet penuaan paket baterai regeneratif COENG untuk siklus pengisian-pengosongan, verifikasi kapasitas, dan QC produksi. Kirim data paket untuk evaluasi proyek.
Regenerative Battery Pack Aging Cabinet For Charge-Discharge Testing
Kabinet penuaan paket baterai regeneratif COENG untuk siklus pengisian-pengosongan, verifikasi kapasitas, dan QC produksi. Kirim data paket untuk evaluasi proyek.
Mesin Perakitan Baterai COENG TWSL-300 3-in-1 18650
Otomatiskan penempelan kertas insulasi 18650, pengujian sel, dan pengelasan titik dengan COENG TWSL-300. Tinjau spesifikasi proses dan minta penawaran proyek.
COENG DJ100S Semi-otomatis Prismatic Battery Cell Stacking dan Mesin Penekan
Short product description The COENG DJ100S is a semi-automatic prismatic battery cell stacking and pressing machine for 280Ah lithium-ion battery modules. It combines manual loading, PLC-controlled electric cylinder pressing and manual steel band fastening in one module assembly station. Product ...
Kotak Sarung Tangan Vakum Satu Stasiun COENG Dengan Sistem Pembersihan Untuk Penelitian Baterai
COENG Single-Station Vacuum Glove Box With Purification System The COENG vacuum glove box with purification system provides an enclosed workspace for processes requiring controlled water and oxygen levels. Its single-side operating layout combines a stainless steel chamber, an inclined viewing ...
Minta Kutipan
Silakan isi formulir di bawah ini dan kami akan menghubungi Anda sesegera mungkin.
