0.6KW Spot Welding Machine For Battery Pack DC 10000A Transistor Welding Power

Main Function:

Cylindrical battery, Prism battery, Polymer battery Pneumtic spot welding with  nickel sheet

Welding range:

Power battery, digital battery, NiMH nickel-nickel chromium battery, electronic rotor, electronic and electrical accessories, etc

Feature:

► The equipment is beautiful and firm structure

► The welding point is beautiful, with less sparks, and the nickel sheet is not black after welding

► Using inlet low impedance capacitance and inlet low impedance MOS pipe, the welding voltage and current output are stable

► FPGA high speed voltage chip is used to detect the output current and voltage in real time

► Bring own over current or over pressure, under current or under pressure alarm

► This machine has a 5-inch DMT80480T050-16WT touch-type display

► The 7-inch DMT80480T070-18WT touch display can be mounted

► The pressure of the two welding pins is adjusted independently to ensure the stable and reliable welding pressure

► The output current direction flows from the positive to the negative

► preheating current, welding current and cooling can be set

► With the function of slow rise and slow lowering, it can inevitably produce splash during welding and meet the welding requirements of special materials

► Easy to install and use, the overall equipment is light

► Spot welding data acquisition can collect welding data via RS485 or RS232

► External industrial controller / PLC control and cooperate with automatic machine production

► During the operation, if the controller detects the situation abnormality, it will automatically turn off the output and alarm the prompt

► The control signal adopts the foot stepping switch or the external control

► The equipment has its own fault alarm and clear the fault according to the prompt

► The machine warranty period is two years, and the faulty technician will handle it within 24 hours