Energy Storage System & Components

Product Description: The 18s high voltage BMS typically comprises a BCU, BMU, and FAN. The BCU maximum support 270 series LiFepo4 battery module, aims to offer protection from overcharge, over-discharge, over current,over temperature, low temperature, and multiple-level alarm mechanism. The BMU ...

Product Description Electrical power energy management system uses B/S structure of energy management, collects energy consumption and operation information from onsite devices (power distribution,lighting,air conditioning,elevators,water supply and drainage,hot water units and key equipment), then ...

Product Description EMS can realize on-grid and off-grid control, peak shaving and valley filling, demand control, smoothing new energy fluctuations, dynamic expansion, and optimization of energy storage revenue, etc. Product parameters item value Output Type Other Size 440*120*44mm Weight 1.84 ...

Product Description: CAN FD communication. It is meant for rapid prototyping of a high-voltage battery management system (HVBMS) hardware and software. This board contains two MC33772C battery sensors for redundant high voltage and current measurements and performs

Product parameters: Type DC/AC Inverters Capacity Other Output Frequency 50/60Hz Isolation Method Transformer Communication Interface RS485 / CAN/Ethernet Output Type Triple Weight 2350kg System Voltage 580-950V Protection Class IP54 Size 1300*1000*2300mm

Product parameters: AC (Grid-connected) Apparent power 165kVA Rated power 150KW Rated voltage 400V Rated current 217A Voltage range 360V-440V Rated frequency 50/60Hz Frequency range 45-55/55-65Hz THDI ﹤3% PF 0.8 lagging-0.8 leading AC connection 3/N/PE AC input 200kVA AC (Off-grid) Apparent power ...

Product Description: 1 Good display effect: high resolution, which can provide clear and detailed data display 2 Easy to operate: humanized user interface and operation mode to improve work efficiency; 3 High reliability: it can keep stable operation for a long time with low failure rate. 4 Powerful ...

Product Description: Specification Model P128S-0001 1 Adopt two-level protection 2 Support 40S-128S 3 Support hierarchical management and control of modules/packs/clusters. 4 Support energy storage applications within 500V 5 Support multi-channel relay drive and relay adhesion detection. 6 Automatic ...

Product Description: Robust Design: IP65-rated ABS enclosure for harsh environments. High Safety: Integrated surge arrester (40kA) and fuse protection. Flexible Configuration: Adjustable input current (60A) and wide fuse range (10A–80A). Certified Compliance: Meets IEC/EN standards with TUV & CE ...

Product Description: With overall protection such as counterattack prevention over-current protection, over-voltage protection and lightning prevention. PV combiner boxes are used to reduce the connecting wires between a PV module and an inverter or controller, make maintenance easy, reduce the loss ...

Product Description: The High and low voltage switchgear is a device connected to high voltage or low voltagecable. General power supply bureaus and substations use high-voltage cabinets, and thru thepower transformer for step down to low-voltage cabinets, then thru low-voltage cabinets toeach power ...

Product Description: PV combiner box bus synthetic DC input of 8 PV components to 1 output. Each channel is with a fuse. Output side is equipped with lightning protection and circuit breaker. It greatly simplify input wiring of DC power distribution cabinet and inverter. Realize lightning protecion, ...

Product Description: The output voltage is stabilized, free of peaks, smoothed and filtered. Galvanic isolation between input and output: No overvoltage at the output and thus protection of the consumer if the ground line is lost. Clean, undisturbed mass ratios, even with long supply lines. Stable ...

Product Description: The DC Battery Charger is a versatile and efficient charging solution designed for solar MPPT systems. With a start battery charge current ranging from 0-5A and a start battery voltage range of 10.5V-6V, this charger ensures optimal performance and reliability. Equipped with a ...

Main features: high frequency transformer isolation full hot plug design super denoise mode less than 55dB fan audio noise solar power input support by MPPT wide output range of voltage from 150Vdc to 1000Vdc, workable on a wide range of electric vehicles constant current for higher output power at ...