From Desert to Energy Hub: Uzbekistan’s First Fully Automated Prismatic Lithium-Ion Battery Module Line Goes Live
2026-06-25
12ppm, pack aseembly line in Uzbekstan
| 1 | 2 units of 6-Axis Robot Loading |
| 2 | 1 unit of Adhesive application workstation |
| 3 | 1 unit of Stacking Pressing and Strapping |
| 4 | 1 unit of Code Scanning and Binding |
| 5 | 1 unit of Polarity testing and Addressing |
| 6 | 1 unit of Laser Cleaning |
| 7 | 1 unit of Laser Welding |
A turnkey production solution that fuses advanced robotics, laser precision, and local resilience – powering Central Asia’s green transition.
Date of Commissioning: June 15, 2026
Location: Jizzakh Special Industrial Zone, Republic of Uzbekistan
Key Figures:
-
Mr. Alisher Karimov – Deputy Minister of Investments, Industry and Trade, Uzbekistan
-
Ms. Elena Vakhabova – Plant Operations Director, local battery assembly joint venture
-
Mr. Lu Hai – Project Lead, automation systems integration team
Project Background
Uzbekistan sits at the heart of the ancient Silk Road, but today it faces a modern imperative: diversify its energy mix, reduce natural gas dependency, and electrify transport. With over 36 million people and a rapidly urbanising population, the country sees annual electricity demand grow by 6–8%. Yet grid instability in rural areas and rising fuel import costs have made local energy storage a national priority.
Under the “Uzbekistan – 2030” strategy, the government has pledged to raise the share of renewable electricity to 25% and deploy 150,000 electric vehicles (EVs) on domestic roads by 2030. To support this, a domestic battery supply chain is not a luxury – it is a strategic necessity. Until now, all prismatic lithium-ion battery modules for e‑buses, agricultural EVs, and grid storage were imported, incurring long lead times, high tariffs, and logistical risks across the Caspian corridor.
The Challenge: Harsh Climate, Skilled Labour Gap, and Cost Sensitivity
The Jizzakh region experiences extreme continental weather – summer temperatures exceeding 45°C, heavy dust storms, and winter frosts below -15°C. Imported battery lines from temperate zones often suffer from cooling inefficiencies, sensor drift, and dust ingress. Moreover, local technical talent is abundant but lacks hands-on experience with high-speed laser welding and robotic polarisation testing. Any solution had to be:
-
Climate-hardened – with sealed optical paths, active thermal management, and IP54-rated enclosures.
-
Operator-friendly – with intuitive HMI and step-by-step diagnostic guidance in Russian and Uzbek.
-
Cost-competitive – to achieve a 30% lower module cost than imported equivalents, making EVs affordable for taxi fleets and municipal buses.
The Solution: A Compact, High-Precision Automated Cell-to-Module Line
In response, a dedicated prismatic battery module production line was engineered and commissioned over 14 months. The line integrates seven core workstations, fully synchronised via a central MES (Manufacturing Execution System):
| Station | Equipment | Function |
|---|---|---|
| 1 | 2 x 6‑axis robotic loaders | Automated cell feeding, alignment, and tray handling – dual-arm redundancy ensures 99.97% uptime. |
| 2 | Adhesive application workstation | Precision dispensing of thermal interface materials for cell-to-heatsink bonding, with real‑time viscosity feedback. |
| 3 | Stacking, pressing & strapping unit | Compresses cell stacks under controlled force (0.5–3 kN) and applies steel/PET straps – eliminates manual torquing errors. |
| 4 | Barcode scanning & binding station | Reads individual cell QR codes and binds them to module IDs – full traceability down to batch level. |
| 5 | Polarity detection & address allocator | Non-contact Hall‑effect sensors verify each cell’s polarity before welding; assigns CAN bus addresses for BMS communication. |
| 6 | Laser cleaning system | Fibre‑laser ablates oxide layers from busbar pads – ensures consistent weld penetration. |
| 7 | Laser welding station | 1.5 kW CW laser with seam tracking – performs 56 welds per module in 45 seconds, with dynamic power adjustment for different aluminium thicknesses. |
The entire floor footprint is only 380 m² – remarkably compact for an annual capacity of 12,000 modules (enough for 4,000 e‑buses or 60 MWh of stationary storage). Changeover between cell formats (VDA 355, 390, and custom 650 mm) takes under 30 minutes, enabling flexible production for both transport and utility clients.
Local Adaptation: Designed for Uzbekistan’s Realities
To address the dusty, hot environment, engineers added:
-
Pressurised clean-air cabinets over the laser optics and polarity sensors, reducing cleaning intervals from daily to weekly.
-
Water‑cooled chiller units that use evaporative cooling – optimised for low‑humidity conditions, cutting water consumption by 40% compared to air‑cooled systems.
-
Offline simulation software pre‑programmed with local voltage/frequency fluctuations (220V ±15%, 50 Hz), so the line automatically throttles peak power draws during grid sags – a common issue in regional industrial parks.
The line was officially inaugurated on June 25, 2026, in a ceremony attended by regional governors and representatives from the Ministry of Energy. In his speech, Deputy Minister Karimov highlighted:
“This facility is not a mere assembly shop – it is a technology transfer hub. Our engineers have already completed 2,000 hours of on‑site training, and we expect to create 220 direct jobs and 350 indirect jobs in logistics, maintenance, and recycling within two years. More importantly, it reduces our battery import bill by an estimated $47 million annually, while enabling us to export modules to Kazakhstan, Kyrgyzstan, and Afghanistan – markets that share our climate and mobility needs.”
Local municipality data shows that within the first trial month, the line produced 340 modules that were installed in 85 electric micro‑buses for Tashkent’s new BRT (Bus Rapid Transit) route. Early feedback from drivers: battery temperatures remained 8°C lower than previous imported units, thanks to the adhesive and stacking uniformity.
Results at a Glance (First 30 Days)
| Metric | Performance |
|---|---|
| Overall Equipment Effectiveness (OEE) | 87.3% (vs. global benchmark 82%) |
| Welding defect rate | 0.12% (laser cleaning reduced spatter by 62%) |
| Module cycle life (tested) | ≥ 4,500 cycles at 80% DoD – exceeds local warranty requirement |
| Local content share | 34% (enclosures, cables, cooling plates sourced from Uzbek suppliers) |
Future Roadmap
Encouraged by the initial success, the joint venture plans to double capacity by Q1 2028 and add a second‑life battery testing station for retired EV packs – transforming waste into solar farm buffers. The government has already allocated a 12‑hectare plot adjacent to the plant for a supplier park, aiming to increase local content to 55% within three years.
Conclusion: A Replicable Model for Arid‑Region Electrification
This project proves that advanced prismatic battery automation can thrive outside traditional manufacturing hubs – provided the line is purpose‑adapted to local dust, heat, and grid conditions. For Uzbekistan, it marks the dawn of a domestic energy‑storage ecosystem that strengthens energy security, creates skilled careers, and positions the country as a regional battery champion.
As Ms. Vakhabova put it during the closing ceremony: “We are not just assembling cells – we are assembling confidence in our industrial future.”
COENG Semi-Automatic Energy Storage PACK Production Line 01
Explore COENG’s semi-automatic energy storage PACK production line for prismatic cell sorting, module laser welding, PACK assembly and EOL testing.
COENG Semi-Automatic Energy Storage Battery PACK Production Line
COENG Semi-Automatic Energy Storage Battery PACK Production Line Product Overview The COENG semi-automatic battery pack production line combines battery module manufacturing and PACK assembly in a configurable production system. Designed for prismatic aluminum-shell cells, this integrated system ...
860–1720 KWh Containerized BESS | EnerCube 3.0 | COENG
COENG EnerCube 3.0 Containerized Battery Energy Storage System 860-1720 kWh Energy Capacity | 400-800 kW Rated Output | LiFePO4 Battery Technology COENG EnerCube 3.0 is an all-in-one containerized battery energy storage system designed for commercial and industrial energy projects. With five ...
COENG DJ100S Semi-Automatic Prismatic Battery Cell Stacking And Pressing Machine
Short product description The COENG DJ100S is a semi-automatic prismatic battery cell stacking and pressing machine for 280Ah lithium-ion battery modules. It combines manual loading, PLC-controlled electric cylinder pressing and manual steel band fastening in one module assembly station. Product ...